AMC FLOC DD™ is a specially formulated flocculant designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water based drilling fluid systems. The cationic charge found in AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.
AMC FLOC DD™ is a specially formulated flocculant designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water based drilling fluid systems. The cationic charge found in AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC VIS GEL SW™ is a proprietary blend of high quality bentonite and specially selected polymers that produce a complete drilling fluid system in areas where fresh water is not available. The AMC VIS GEL SW™ system is designed to improve carrying capacity and filtration control properties to promote borehole stability. AMC VIS GEL SW™ is unique in the fact it will blend and hydrate easily into hard to salt saturated water conditions and is ideal for all types of drilling applications.
The MARSH CUP is an instrument used to measure drilling fluid viscosity, commonly used with the AMC MARSH FUNNEL. The MARSH CUP is a measuring cup which is graduated in fluid ounces (2-32oz) and cubic centimeters (100 – 1,000cc) and is designed to be used with the MARSH FUNNEL.
AMC HV FOAM SW™ is a new generation, highly concentrated foam which have been formulated for use in mineral and water well drilling applications. AMC HV FOAM SW™ is specifically formulated to produce a stable, high density foam in all types of ground water conditions including brackish, highly saline and hard water.
AMC FLOC DD™ is a specially formulated flocculant designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water based drilling fluid systems. The cationic charge found in AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.
AMC FLOC DD™ is a specially formulated flocculant designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water based drilling fluid systems. The cationic charge found in AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
Displacement plugs are used in diamond wireline drill rods and casings for placing cement plugs or casing pack fluid.
AMC BORE SEAL™ is used to improve borehole stability and core recovery by improving fluid loss control, seepage loss and other fluid loss control situations in highly porous and fractured formations. It is available in three grades – (F)ine, (M)edium and (C)oarse. AMC BORE SEAL™ F fibers will matrix within the wall cake to form an impermeable thin skin on the filter bed resulting in minimal fluid invasion into formation. AMC BORE SEAL™ M & C can be used as loss circulation additives when more severe losses are encountered.
AMC BIODEGRADABLE HAMMER OIL™ is a vegetable oil based hammer lubricant supplied in three grades, 150, 320 and 460 centipoise.