The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry | Construcción civil, Geotécnica, Minería, Perforación horizontal dirigida, Pozo de agua |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
The SAND CONTENT KIT is a simple and accurate sieve analysis tool used to determine the sand content of drilling fluids.
CALCIUM CHLORIDE is a salt used to create solids free brine workover and completion fluids. It can be used to prepare weighted drilling fluids where formation pressures require densities ranging from 1.02 – 1.40sg (8.5 – 11.7lb / bbl). In combination with CALCIUM BROMIDE, CALCIUM CHLORIDE achieves densities up to 1.8sg (15lb / bbl).
AMC WELLCLEAN™ is used in the development and clean up of water wells where bentonite based mud has been used. AMC WELLCLEAN™ breaks down the viscosity of a bentonite mud and will disperse any wall cake that has formed on the walls of the drill hole, promoting rapid and effective clean up.
The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
IMDEX MUD AID™ (Automated In-field Diagnosis) is a remotely monitored, in-field mud testing unit, designed to optimise and automate fluid management.
As part of IMDEX’s Drilling Optimisation solution, the IMDEX MUD AID™ and AMC Ultra-light Solids Removal Unit™ (ULW SRU™) converge to optimise rate of penetration, core recovery and meters per bit, utilising the latest solids control, fluid analysis and remote tracking technology – all in an ultra light-weight design.
Displacement plugs are used in diamond wireline drill rods and casings for placing cement plugs or casing pack fluid.