PORTLAND CEMENT is a low temperature Sulfate Resisting Cement Type SR, with many applications and capable of setting, hardening and remaining stable in accordance to Australian Standard “AS 3972 – 2010”.
PORTLAND CEMENT is a low temperature Sulfate Resisting Cement Type SR, with many applications and capable of setting, hardening and remaining stable in accordance to Australian Standard “AS 3972 – 2010”.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC WONDERCUT™ is a high performance extreme pressure cutting oil which can be used when drilling with diamond core bits, through hard, abrasive formations. AMC WONDERCUT™ contains extreme pressure lubricating agents which will help to cool diamond bits, facilitate improved production rates, extend bit and ream life, reduce rod torque and help eliminate rod vibration.
The SAND CONTENT KIT is a simple and accurate sieve analysis tool used to determine the sand content of drilling fluids.
AMC TUBE LUBE™ is produced from processed linseed and contains no harsh chemicals or hydrocarbon based ingredients. AMC TUBE LUBE™ has been developed to enable the core sample to enter and slide more easily into the inner tube promoting longer runs through fractured broken formations. AMC TUBE LUBE™ will protect and improve the life of the inner tube, is water soluble and will not stain the core.
PORTLAND CEMENT is a low temperature Sulfate Resisting Cement Type SR, with many applications and capable of setting, hardening and remaining stable in accordance to Australian Standard “AS 3972 – 2010”.
PORTLAND CEMENT is a low temperature Sulfate Resisting Cement Type SR, with many applications and capable of setting, hardening and remaining stable in accordance to Australian Standard “AS 3972 – 2010”.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC 117™ provides superior shale and clay inhibition in polymer based drilling fluids. AMC 117™ reduces the potential for bit balling, torque and drag as well as other clay and shale related issues. All this is delivered by a product that is more environmentally acceptable than the inhibitor typically used, Potassium Chloride.
AMC BORE SEAL™ is used to improve borehole stability and core recovery by improving fluid loss control, seepage loss and other fluid loss control situations in highly porous and fractured formations. It is available in three grades – (F)ine, (M)edium and (C)oarse. AMC BORE SEAL™ F fibers will matrix within the wall cake to form an impermeable thin skin on the filter bed resulting in minimal fluid invasion into formation. AMC BORE SEAL™ M & C can be used as loss circulation additives when more severe losses are encountered.
AMC BORE HOLE STABILISER™ is a multifunctional product formulated specifically for air drilling applications including “Drill & Blast”. It helps prevent a wide range of down-hole problems including poor collaring, hole decay or sidewall instability, significantly reducing the need for excess conditioning, expensive redrills or casing.