Showing 1–12 of 67 results
Conventional wireline coring has been transformed. High frequency energy pulse assisted drilling (EPAD) enables the IMDEX COREVIBE™ to deliver a 30%* productivity gain, due to increases of up to 90% rate of penetration (ROP) whilst retaining good bit life, core quality and hitting targets.
IMDEX XTRACTA™ allows the driller to inspect and/or change the bit/reamer each time the core is retrieved. This means there is no need to pull the rods to change bits and the hole is always cased, maintaining hole integrity.
AMC BENTONITE PELLETS™ are a highly compressed pellet made from premium sodium bentonite. AMC BENTONITE PELLETS™ has the advantage of achieving greater depths due to the highly compressive nature of the pellet.
AMC AEROFOAM™ is a biodegradable mixture of anionic surfactants which has been formulated for use in the mineral and water well drilling industries.
AMC BENTONITE HV™ is a modified, high quality grade bentonite formulated to ensure a high quality bentonite mud can be mix with ease. AMC BENTONITE HV™ provides viscosity and gelling to most water based fluids while also contributing to fluid loss control.
AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids. AMC BIOCIDE G™ is a more environmentally acceptable alternative to glutaraldehyde and does not cause skin sensitisation and dermatitis that can occur through the handling of glutaraldehyde making it safer to handle.
AMC BIODEGRADABLE HAMMER OIL™ is a vegetable oil based hammer lubricant supplied in three grades, 150, 320 and 460 centipoise.
AMC BIODEGRADABLE ROD GREASE™ is a biodegradable non-toxic grease formulated from vegetable oils, specialised tackifiers and thickening agents to produce a very stable compound suited for diamond drilling applications in areas where environmental protection is of paramount importance. AMC BIODEGRADABLE ROD GREASE™ contains no mineral oils, heavy metals, barium, environmentally unfriendly solvents, PSB’s, copper or zinc compounds. Through enhanced surface sticking characteristics AMC BIODEGRADABLE ROD GREASE™ offers superior performance to reduce vibration and frictional drag between the rod and casing or rock strata.
AMC BORDET™ is a concentrated blend of surfactants which are highly effective at coating metal surfaces. AMC BORDET™ is designed to reduce the surface tension in water based fluids and reduce the tendency of clays to stick to metal surfaces including the drill string.
AMC BORE HOLE STABILISER™ is a multifunctional product formulated specifically for air drilling applications including “Drill & Blast”. It helps prevent a wide range of down-hole problems including poor collaring, hole decay or sidewall instability, significantly reducing the need for excess conditioning, expensive redrills or casing.