Showing 37–48 of 61 results
AMC ROD GREASE XTRA TACKY™ is a specially formulated, tenacious, barium-based grease recommended for use on diamond drill rods to reduce vibration and friction between the rod and casing or rock strata. AMC ROD GREASE XTRA TACKY™ is particularly effective in dry hole drilling, is thermally stable and will perform in a variety of harsh conditions. AMC ROD GREASE XTRA TACKY™ has superior adhesion characteristics designed to provide exceptional film strength when subjected to extreme down hole pressures.
AMC SHALEHIB ULTRA™ is an amine based product that provides superior shale and clay inhibition in polymer based drilling fluids. Effective in formations containing shale and reactive clay AMC SHALEHIB ULTRA™ reduces the potential for bit balling, torque and drag as well as other clay and shale related issues. All this is delivered by a product that has a minimal chloride content, making it far more environmentally acceptable than potassium chloride, which is typically used for inhibition.
AMC SUPERFOAM™ is a biodegradable mixture of anionic surfactants which has been formulated for use in the mineral and water well drilling industries.
The AMC Solids Removal Unit™ (SRU™) is an innovative alternative to fluid sumps, proving highly beneficial for the environment, on-site health and safety, operational efficiency as well as delivering significant cost savings. The SRU™ closed-loop system is transforming drilling operations worldwide, reducing environmental impact and footprint of the drill site.
AMC TORQUE GUARD™ is a distinctive, next generation, high performance extreme pressure lubricant utilising sophisticated technologies to improve the lubricating qualities of a drilling fluid through advanced adhesion and filming characteristics. AMC TORQUE GUARD™ is a high performance torque reducer specifically designed to provide friction reduction through enhanced lubricating characteristics of most water-based drilling fluid systems.
AMC TUBE LUBE™ is produced from processed linseed and contains no harsh chemicals or hydrocarbon based ingredients. AMC TUBE LUBE™ has been developed to enable the core sample to enter and slide more easily into the inner tube promoting longer runs through fractured broken formations. AMC TUBE LUBE™ will protect and improve the life of the inner tube, is water soluble and will not stain the core.
As part of IMDEX’s Drilling Optimisation solution, the IMDEX MUD AID™ and AMC Ultra-light Solids Removal Unit™ (ULW SRU™) converge to optimise rate of penetration, core recovery and meters per bit, utilising the latest solids control, fluid analysis and remote tracking technology – all in an ultra light-weight design.
AMC XAN BORE™ is a premium quality biopolymer powder designed to provide maximum solids suspension and hole cleaning in vertical wells as well as horizontal directional drilling applications. AMC XAN BORE™ is a distinctive product, able to produce a thixotropic shear thinning fluid. AMC XAN BORE™ also acts as a very effective mud filtrate viscosifier.
AUS DEX™ is a modified starch with a high degree of environmental acceptability. AUS DEX™ provides filtration control without excessive viscosity build-up in most water based fluids ranging from fresh water to high concentrations of monovalent salts and low concentrations of divalent ions.
CALCIUM CHLORIDE is a salt used to create solids free brine workover and completion fluids. It can be used to prepare weighted drilling fluids where formation pressures require densities ranging from 1.02 – 1.40sg (8.5 – 11.7lb / bbl). In combination with CALCIUM BROMIDE, CALCIUM CHLORIDE achieves densities up to 1.8sg (15lb / bbl).
CITRIC ACID is used to reduce pH, precipitate soluble calcium and sequester iron and other metal poly-cations.
EUROGEL XTRA is a an easy to mix, one-sack drilling fluid system that provides various beneficial rheological and filtration properties. EUROGEL XTRA is designed for use in horizontal directional drilling, water well, mining and tunneling applications.