Showing 37–48 of 138 results
AMC CR 650™ is a high molecular weight, powdered polymer which has been developed to improve cuttings encapsulation as well as helping to stabilise the formation. AMC CR 650™ forms a protective polymer film on the drill pipe and bit as well as on the walls of the bore hole which helps to provide lubrication when drilling in troublesome formations. It is ideally suited for use in horizontal directional drilling, water well, mining and tunnelling applications.
AMC CRACKEM™ is a non-explosive, expansive, silent cracking agent used for stone breaking, granite and marble quarrying, concrete cutting and demolition. AMC CRACKEM™ is easy to use, cost effective and a safer option for silently breaking up hard materials like rock or concrete.
AMC DEFOAMER S™ is a silicone based all purpose defoamer and anti-foamer for use in water based drilling fluids. It is designed to reduce surface tension and break foam bubbles over a wide variety of conditions.
AMC DET XTRA™ is a concentrated blend of surfactants which are highly effective at coating metal surfaces. AMC DET XTRA™ is designed to reduce the surface tension in water based fluids and reduce the tendency of clays to stick to metal surfaces including the drill string.
AMC DRILL PAPER™ is a blend of variable sized particles of ground paper that is applicable for use in all water based drilling fluid systems used to cure lost circulation.
AMC DRTG ZN50™ is a heavy duty, high performance thread compound containing 50 % metallic zinc, thickening agents and proprietary additives. AMC DRTG ZN50™ is a No. 2 consistency grease designed to reduce galling, friction and minimise wear. AMC DRTG ZN50™ is extremely tenacious and will adhere to all metal surfaces, is resistant to water wash and helps prevent corrosion.
AMC ECO GRIP A & B™ is a dual component, low density, rigid, foaming agent specifically designed for plugging applications. AMC ECO GRIP A & B™ is formulated with a Zero ODP¹, Zero GWP², and VOC³ exempt revolutionary blowing agent which is CFC, HCFC and HFC free. AMC ECO GRIP A & B™ provides superior adhesion. It contains a flame retardant additive and is designed for ease of mixing in field applications.
AMC EZEE BORE XTRA™ is high yielding, easy to mix, one-sack drilling fluid system that provides excellent rheological and filtration control properties and is ideally suited for use in horizontal directional drilling, water well, mining and tunnelling applications.
AMC EZEE BORE™ is an easy to mix, one-sack drilling fluid system that provides excellent rheological and filtration control properties and is ideally suited for use in horizontal directional drilling, water well, mining and tunnelling applications.
AMC EZEE CUT™ is a blend of highly refined mineral oils, emulsifiers and surfactants specially formulated to produce a low cost, high performance cutting oil for mineral drilling applications. AMC EZEE CUT™ will provide lubrication and can significantly extend bit and reamer life which will benefit both cost and production.
AMC EZEE DRILL™ is a simple to use liquid product that will help improve drilling efficiency by providing borehole stability and lubrication without the problems associated with mixing powdered polymers. This product is ideally suited to underground drilling operations where only minimal shearing is available.
AMC EZEE MIX SDFC™ is a partially hydrolysed polacrylamide copolymer emulsion used to improve hole stability in reactive clay and shale formations by encapsulation. AMC EZEE MIX SDFC™ may be used to prepare a solids free drilling fluid system with exceptional hole stabilizing characteristics or used to improve the properties of foam injection fluids. AMC EZEE MIX SDFC™ will shear rapidly to achieve good viscosity in fresh to mildly brackish make up water.