ImdexLeadingBrandLogo

The future of exploration

GEROSPRINT by IMDEX

In the September issue of GeoDrilling International, Dr Michelle Carey, general manager – product development at IMDEX, discusses future challenges and the key disrupters, innovations and collaborations within the mineral exploration industry

In my view the three greatest challenges for mineral explora­tion in the future are firstly the need to explore underground cover and at greater depths. The easy surface ore bodies have been found and resource compa­nies are mining their reserves faster than they are replacing them. Secondly, the changing skillsets for geologists as there will be an increasing need for data science and analysis, rather than ‘rock licking’. This transition may be challenging for some geologist who have a real pas­sion for fieldwork. Finally, there is the issue of the social license to operate, especially in countries where there are geopolitical chal­lenges or there is competition for vital resources such as water.

If I were to predict the three greatest disruptors to explora­tion, it would be: automation of the drilling process; low environ­mental impact mining, such as a move away from surface open pits; and in conjunction with that precision mining.

INNOVATION
In my mind, the most game ­changing innovation has been the digitisation of the exploration cycle, which has dramatically improved the availability, accuracy and timeliness of data for critical decision making.

An example of this digitisation is the development of portable XRF on-site assays and how that has been incorporated into workflows that allow geologists to look at chemistry data they can trust in real-time.

Similarly, the availability of analytical software – for example, IMDEX ioGAS – to allow any geologist to interpret large amounts of data using quite sophisticated methodology from classification diagrams to cluster analysis to self-organising maps.

Rounding out the digitisation story is the move to 3D. The trend that we are seeing now is that sensors and software are all joining up into systems enabling geologists to monitor the progress of their programmes in 3D and no doubt soon enough go from data to 3D modelling in a semi-automated way. Our relationship with Seequent and recent joint releases is a step along that path.

One thing that has not changed a lot over the past 30 years is the drilling itself – although all of this is about to change with the release of our new drilling productivity technologies.

COLLABORATION
Innovation has certainly made exploration more successful, particularly in recent years. A really pleasing trend now is the push towards greater collabo­ration between technology and service providers to achieve the best outcomes for clients. Our own recent examples include collaboration with MICROMINESeequent and acOuire Technol­ogy Solutions, which mean that data from the field is seamlessly put where a geoscientist needs it.

The integration of IMDEX ioGAS with MICROMINE’s latest 3D modelling and mine design software enables geoscientists to directly import ioGAS (.gas) files into Micromine 2020 software to map and model geological domains.

The Seequent partnership integrates IMDEXHUB-IQ with Seequent’s Central software, which provides 3D visualisation of geological data in real-time and our partnership with acQuire also integratesIMDEXHUB-IQ with its GIM Suite. The result for clients is an integrated and automated workflow, which means less manual handling of data, improved data governance and data quality, and streamlined access to trusted results.

“The push towards greater collabo­ration between technology and service providers”
– Dr Michelle Carey, general manager – product development at IMDEX

WE HAVE COME A LONG WAY

There have been a vast range of changes and even within our traditional core business of downhole surveying and core orientation, procedures have certainly advanced.

At IMDEX we introduced the first digital survey tool – the REFLEX EZ-SHOT – to the market in the late 1990s to replace analogue photographic tools. We then progressed to digital magnetic-based tools such as our REFLEX EZ-TRAC.

Now our focus is on delivering a wider range of gyros to meet the needs of clients – including continuous mode north-seeking gyros like our REFLEX GYRO SPRINT-IQ, which are consider­ably more accurate and faster.

The key advancement behind all of this was enabling drillers to use high-end tools with confidence and removing the need to rely on survey providers, which incurred additional costs and often time delays for projects.

Geologists also have access to all the data collected by a survey tool in real-time now, so they can check the quality and critically, make decisions about whether the hole is still on target.

It is not just survey tools that drillers are operating now, we have taken the same approach with petrophysical sensors – for example, the REFLEX EZ-GAMMA– which allows geologies to obtain rock property data at the completion of each drill hole.

With core orientation it used to involve ‘spearing’ – which literally meant dropping a spear down the hole to make a mark on top of the drill core to assist with its orientation. As you can imagine, this process was very unreliable. Often the spear did not make it to the bottom of the hole, or it did not leave a mark. Fortunately, this process was superseded by mechanical downhole orientation systems such as the Ballmark and Ezymark.

IMDEX introduced its first digital core orientation tool – the REFLEX ACT – in 2004. This was considered to be a revolutionary tool, as it made orientation so easy that it became a widely adopted practice for the industry. The shift to digital – such as the REFLEX ACT-IQ – also allows an audit trail on the quality of the orientation mark.

Other examples of progress include the adoption of paperless documentation and sumpless drilling.

It was common to see boxes and boxes of pre-ordered carbon books on site for all the docu­mentation required around the rig. Nowadays crews are using software such as IMDEX Mobile for paperless data collection and productivity reporting. In addition to eliminating the cumbersome boxes, the benefits include real-time access to data they can trust by a wider range of stakeholders and critical decision-makers.

Similarly, earthen fluid sumps on site are becoming a thing of the past. The adoption of solids removal units is increasing due to environmental concerns and challenges associated with the social licence to operate.

Our AMC Ultra Lightweight Solids Removal Unit is a com­pletely closed-loop system. This means it substantially decreases the volume of water and mud required, minimises site disturbance and creates a safer work environment. The unit can even be coupled with the IMDEX MUD AID, a remotely monitored, in-field mud testing unit, designed to optimise and automate fluid management.

The drilling fluids themselves have become a lot more sophisti­cated. Historically we were largely limited to bentonite, but now there is a range of products and customised fluid systems that support drilling in difficult ground conditions and enable better core recovery.

The list could go on. What is also noteworthy and very pleasing, is that our operations are getting a lot safer.

Australian METS should be very proud of our software innovations – we have emerged as leaders in this space.