Showing all 6 results
AMC FLOC BLOCKS™ are an anionic flocculant in the form of a solid block which has been specially designed to slowly dissolve in water flows and to flocculate drill solids and promote them settling in the surface pits.
AMC FLOC DD™ is a specially formulated flocculant designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water based drilling fluid systems. The cationic charge found in AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.
AMC HEXA T™ will disperse any wall cake that has formed on the walls of the drill hole, promoting rapid and effective clean up. AMC HEXA T™ is used in the clean up and development of bore holes where bentonite based mud has been used and can also act as a deflocculated. AMC HEXA T™ also has anti scaling properties.
AMC LIQUI SPERSE PFD™ is a phosphate free, polymeric thinner designed to remove mud and sediment from production zones and gravel packs. It is also effective at deflocculating and thinning bentonite muds. AMC LIQUI SPERSE PFD™ is a phosphate free, water soluble, easily dispersed liquid and requires only small concentrations to provide effective results.
AMC LIQUI SPERSE™ is a polymeric thinner designed to effectively deflocculate bentonite muds and control rheological properties. It is a water soluble, easily dispersed liquid and requires only small concentrations to provide effective thinning results. AMC LIQUI SPERSE™ can be added to thin and stabilize bentonite muds prior to the addition of other additives such as AMC PAC L™ filtration reducing agent.
AMC WELLCLEAN™ is used in the development and clean up of water wells where bentonite based mud has been used. AMC WELLCLEAN™ breaks down the viscosity of a bentonite mud and will disperse any wall cake that has formed on the walls of the drill hole, promoting rapid and effective clean up.