El AMC 117™ proporciona una inhibición superior de arcillas y lutitas en fluidos de perforación poliméricos. AMC 117™ reduce las probabilidades de embolamiento de la herramienta en arcillas reactivas (bit balling), altos valores de torque y arrastre, como así también otros problemas relacionados con arcillas y lutitas. Además, este producto tiene mayor aceptación ambiental que inhibidores tradicionales como el cloruro de potasio.
El AMC 117™ proporciona una inhibición superior de arcillas y lutitas en fluidos de perforación poliméricos. AMC 117™ reduce las probabilidades de embolamiento de la herramienta en arcillas reactivas (bit balling), altos valores de torque y arrastre, como así también otros problemas relacionados con arcillas y lutitas. Además, este producto tiene mayor aceptación ambiental que inhibidores tradicionales como el cloruro de potasio.
Favor de tener en cuenta: Son varios los factores necesarios a considerar para determinar la concentración más adecuada. Para obtener los mejores resultados, comuníquese con su representante más cercano de AMC.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AUS DEX™ is a modified starch with a high degree of environmental acceptability. AUS DEX™ provides filtration control without excessive viscosity build-up in most water based fluids ranging from fresh water to high concentrations of monovalent salts and low concentrations of divalent ions.
Sodium Chloride (NaCl) is a widely available commercial chemical that can be used as a weighting agent to increase fluid density up to 1.2sg (10lb / gal). It is predominately used for formulating clear, solid free work-over and completion fluids. Sodium chloride can also provide inhibition to formations containing water sensitive clays and shales.
SODA ASH is a free flowing powder also known as sodium carbonate (Na2CO3) used in a fluid system to precipitate calcium (hardness) and increase alkalinity (pH).
AMC 117™ provides superior shale and clay inhibition in polymer based drilling fluids. AMC 117™ reduces the potential for bit balling, torque and drag as well as other clay and shale related issues. All this is delivered by a product that is more environmentally acceptable than the inhibitor typically used, Potassium Chloride.
AMC 117™ provides superior shale and clay inhibition in polymer based drilling fluids. AMC 117™ reduces the potential for bit balling, torque and drag as well as other clay and shale related issues. All this is delivered by a product that is more environmentally acceptable than the inhibitor typically used, Potassium Chloride.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC BENTONITE PLUG™ is designed for use as sealant for hole abandonment, casing seals or any vertical seal to prevent water movement up or down a borehole.
AMC BENTONITE PLUG™ is available in medium (M) (¼” – 3⁄8’’) and coarse (C) (3⁄8” – ¾”) grades.
AMC BENTONITE HV™ is a modified, high quality grade bentonite formulated to ensure a high quality bentonite mud can be mix with ease. AMC BENTONITE HV™ provides viscosity and gelling to most water based fluids while also contributing to fluid loss control.
AMC 1300™ is a liquid non-ionic polymer specifically designed to perform in fresh water, saline environments and calcium chloride brines. AMC 1300™ will provide viscosity while also providing some lubrication to the drilling fluid resulting in improved hole stability and core recovery in broken, friable formations.