Showing 1–12 of 17 results
Conventional wireline coring has been transformed. High frequency energy pulse assisted drilling (EPAD) enables the IMDEX COREVIBE™ to deliver a 30%* productivity gain, due to increases of up to 90% rate of penetration (ROP) whilst retaining good bit life, core quality and hitting targets.
IMDEX XTRACTA™ allows the driller to inspect and/or change the bit/reamer each time the core is retrieved. This means there is no need to pull the rods to change bits and the hole is always cased, maintaining hole integrity.
AMC BORE HOLE STABILISER™ is a multifunctional product formulated specifically for air drilling applications including “Drill & Blast”. It helps prevent a wide range of down-hole problems including poor collaring, hole decay or sidewall instability, significantly reducing the need for excess conditioning, expensive redrills or casing.
AMC CLAY DOCTOR L™ is a versatile modified encapsulating polymer used in water based drilling fluid systems to provide stability when encountering reactive clay and shale formations. AMC CLAY DOCTOR L™’s charge density and molecular weight are uniquely adjusted to maximise encapsulation with only a minimal increase in viscosity.
AMC CLAY DOCTOR R™ is an encapsulating polymer that stabilizes clays and shales without substantially increasing viscosity. It provides excellent cuttings encapsulation and prevents cuttings from sticking together or dispersing into the mud system.
AMC ECO GRIP A & B™ is a dual component, low density, rigid, foaming agent specifically designed for plugging applications. AMC ECO GRIP A & B™ is formulated with a Zero ODP¹, Zero GWP², and VOC³ exempt revolutionary blowing agent which is CFC, HCFC and HFC free. AMC ECO GRIP A & B™ provides superior adhesion. It contains a flame retardant additive and is designed for ease of mixing in field applications.
AMC HAMMER OIL WITH MOLY™ is a specially blended high quality mineral oil combined with moly-lube additive, molybdenum disulfide, to form a heavy duty percussion tool lubricant supplied in two ISO grades, 320 and 460 centipoises AMC HAMMER OIL WITH MOLY™ was developed to provide enhanced lubricating properties and greater protection on the metal surfaces to reduce wear of heavily loaded parts to prevent seizure.
AMC HAMMER OIL™ is a specially formulated mineral-oil based heavy duty hammer lubricant supplied in two ISO grades, 320 and 460 centipoises with or without molylube additive – molybdenum disulfide. This product improves the lubrication and wear characteristics of pneumatically powered DTH hammers.
AMC HV FOAM SW™ is a new generation, highly concentrated foam which have been formulated for use in mineral and water well drilling applications. AMC HV FOAM SW™ is specifically formulated to produce a stable, high density foam in all types of ground water conditions including brackish, highly saline and hard water.
AMC HV FOAM™ is a biodegradable, highly concentrated foam which has been formulated for use in mineral and water well drilling applications. AMC HV FOAM™ is formulated to produce a stable high density foam in all types of ground water conditions from brackish to hard and highly saline.
AMC SHALEHIB ULTRA™ is an amine based product that provides superior shale and clay inhibition in polymer based drilling fluids. Effective in formations containing shale and reactive clay AMC SHALEHIB ULTRA™ reduces the potential for bit balling, torque and drag as well as other clay and shale related issues. All this is delivered by a product that has a minimal chloride content, making it far more environmentally acceptable than potassium chloride, which is typically used for inhibition.