ImdexLeadingBrandLogo

HDD

AMC’s range of quality drilling fluids, solids control and recycling units provides a cost-effective, complete package solution for Horizontal Directional Drilling operations. AMC’s HDD drilling fluid range is specially formulated to avoid frac outs, minimize the impact of clays and sands, prevent fluid loss and are suitable for a broad range of HDD applications, from small to large diameter jobs.

Showing 1–12 of 78 results

  • IMDEX COREVIBE™

    Conventional wireline coring has been transformed. High frequency energy pulse assisted drilling (EPAD) enables the IMDEX COREVIBE™ to deliver a 30%* productivity gain, due to increases of up to 90% rate of penetration (ROP) whilst retaining good bit life, core quality and hitting targets.

  • IMDEX XTRACTA™

    IMDEX XTRACTA™ allows the driller to inspect and/or change the bit/reamer each time the core is retrieved. This means there is no need to pull the rods to change bits and the hole is always cased, maintaining hole integrity.

  • AMC BEN™

    AMC BEN™ is a high quality sodium bentonite for use in mineral exploration, water well and directional drilling.

  • AMC 1000 SC™

    The AMC 1000 SC™ provides an innovative alternative to fluid sumps, offering solids control to optimise drilling fluid and drilling efficiency. The unit processes solids up to 260gpm / 1000Lpm, and incorporates high flow shakers suitable for HDD, mud rotary, diamond drilling and chip-core operations (up to 12 ¼” diameter for top hole drilling).

  • AMC 1500 R™

    The AMC 1500 R™ RECYCLING UNIT is a German-engineered purpose built fluid recycling unit, designed to remove and dispose of drill cuttings in the mud flow cycle of horizontal directional drilling and waterwell drilling applications.

  • AMC 2000 M™

    The AMC 2000 M™ is a self contained system enabling quick and efficient mixing of drilling fluids on site. The unit’s powerful high shear venturi mixing system allows for fast addition and provides a continuous workflow to improve efficiency in HDD, waterwell, microtunneling and deep drilling operations.

  • AMC 500 R™

    The AMC 500 R™ RECYCLING UNIT is a German engineered purpose built fluid recycling unit designed to remove and dispose of drill cuttings in the mud flow cycle of the horizontal directional drilling and waterwell drilling industries.

  • AMC BENTONITE HV™

    AMC BENTONITE HV™ is a modified, high quality grade bentonite formulated to ensure a high quality bentonite mud can be mix with ease. AMC BENTONITE HV™ provides viscosity and gelling to most water based fluids while also contributing to fluid loss control.

  • AMC BIOCIDE G™

    AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids. AMC BIOCIDE G™ is a more environmentally acceptable alternative to glutaraldehyde and does not cause skin sensitisation and dermatitis that can occur through the handling of glutaraldehyde making it safer to handle.

  • AMC BIODEGRADABLE HAMMER OIL™

    AMC BIODEGRADABLE HAMMER OIL™ is a vegetable oil based hammer lubricant supplied in three grades, 150, 320 and 460 centipoise.

  • AMC BORDET™

    AMC BORDET™ is a concentrated blend of surfactants which are highly effective at coating metal surfaces. AMC BORDET™ is designed to reduce the surface tension in water based fluids and reduce the tendency of clays to stick to metal surfaces including the drill string.

  • AMC BORE SEAL™

    AMC BORE SEAL™ is a cellulose based product that is used to improve borehole stability by improving invasion control, seepage loss and other loss control situations.
    It is available in three grades – (F)ine, (M)edium and (C)oarse. AMC BORE SEAL™ F fibres will matrix within the wall cake to form an impermeable thin skin on the filter bed resulting in minimal fluid invasion into the formation. AMC BORE SEAL™ M & C can be used as loss circulation additives when partial return or seepage loss is encountered.

1 2 3 4 5 6 7