Showing 13–24 of 132 results
AMC AEROFOAM™ is a biodegradable mixture of anionic surfactants which has been formulated for use in the mineral and water well drilling industries.
AMC BENTONITE HV™ is a modified, high quality grade bentonite formulated to ensure a high quality bentonite mud can be mix with ease. AMC BENTONITE HV™ provides viscosity and gelling to most water based fluids while also contributing to fluid loss control.
AMC BENTONITE PLUG™ is designed for use as sealant for hole abandonment, casing seals or any vertical seal to prevent water movement up or down a borehole.
AMC BENTONITE PLUG™ is available in medium (M) (¼” – 3⁄8’’) and coarse (C) (3⁄8” – ¾”) grades.
AMC BIO VIS XTRA™ is a premium grade, high viscosity, blend of natural polymers specifically formulated for mixing a low solids drilling fluid for use in a water well. AMC BIO VIS XTRA™ is a non-toxic free flowing powder that is biodegradable.
AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids.
AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids.
AMC BIODEGRADABLE HAMMER OIL™ is a vegetable oil based hammer lubricant supplied in three grades, 150, 320 and 460 centipoise.
AMC BIODEGRADABLE ROD GREASE™ is a biodegradable non-toxic grease formulated from vegetable oils, specialised tackifiers and thickening agents to produce a very stable compound suited for diamond drilling applications in areas where environmental protection is of paramount importance. AMC BIODEGRADABLE ROD GREASE™ contains no mineral oils, heavy metals, barium, environmentally unfriendly solvents, PSB’s, copper or zinc compounds. Through enhanced surface sticking characteristics AMC BIODEGRADABLE ROD GREASE™ offers superior performance to reduce vibration and frictional drag between the rod and casing or rock strata.
AMC BIT GUARD™ is a vegetable oil based lubricant that has been developed as a surface-acting rate of penetration (ROP) enhancer and is designed for use in water-based drilling fluid systems. Its properties were designed for the operating parameters at the face of an impregnated diamond bit giving improved penetration rates and extended bit life. A fluid system containing AMC BIT GUARD™ promotes hydrophobic coating on both the bit and cuttings surfaces. This prevents clay and shale cuttings from balling up the bit and blocking nozzles, improving bit cutting efficiency and increasing penetration rates.
AMC BORDET™ is a concentrated blend of surfactants which are highly effective at coating metal surfaces. AMC BORDET™ is designed to reduce the surface tension in water based fluids and reduce the tendency of clays to stick to metal surfaces including the drill string.
AMC BORE HOLE STABILISER™ is a multifunctional product formulated specifically for air drilling applications including “Drill & Blast”. It helps prevent a wide range of down-hole problems including poor collaring, hole decay or sidewall instability, significantly reducing the need for excess conditioning, expensive redrills or casing.