Showing 1–12 of 107 results
Conventional wireline coring has been transformed. High frequency energy pulse assisted drilling (EPAD) enables the IMDEX COREVIBE™ to deliver a 30%* productivity gain, due to increases of up to 90% rate of penetration (ROP) whilst retaining good bit life, core quality and hitting targets.
IMDEX XTRACTA™ allows the driller to inspect and/or change the bit/reamer each time the core is retrieved. This means there is no need to pull the rods to change bits and the hole is always cased, maintaining hole integrity.
AMC BACKFILL™ is a mixture of premium bentonite, gypsum and sodium sulphate.
AMC BEN™ is a high quality sodium bentonite for use in mineral exploration, water well and directional drilling.
AMC BENTONITE PELLETS R30™ are compressed tablets made from highly swelling sodium bentonite coated with a biodegradable non-sticking film that retards the hydration time and when placed forms a flexible, non-toxic impermeable seal. AMC BENTONITE PELLETS R30™ has the advantage of achieving greater depths due to the unique coating that slows down the hydration process.
The AMC 1000 SC™ provides an innovative alternative to fluid sumps, offering solids control to optimise drilling fluid and drilling efficiency. The unit processes solids up to 260gpm / 1000Lpm, and incorporates high flow shakers suitable for HDD, mud rotary, diamond drilling and chip-core operations (up to 12 ¼” diameter for top hole drilling).
The AMC 1500 R™ RECYCLING UNIT is a German-engineered purpose built fluid recycling unit, designed to remove and dispose of drill cuttings in the mud flow cycle of horizontal directional drilling and waterwell drilling applications.
The AMC 2000 M™ is a self contained system enabling quick and efficient mixing of drilling fluids on site. The unit’s powerful high shear venturi mixing system allows for fast addition and provides a continuous workflow to improve efficiency in HDD, waterwell, microtunneling and deep drilling operations.
The AMC 500 R™ RECYCLING UNIT is a German engineered purpose built fluid recycling unit designed to remove and dispose of drill cuttings in the mud flow cycle of the horizontal directional drilling and waterwell drilling industries.
AMC BENTONITE PLUG™ is designed for use as sealant for hole abandonment, casing seals or any vertical seal to prevent water movement up or down a borehole.
AMC BENTONITE PLUG™ is available in medium (M) (¼” – 3⁄8’’) and coarse (C) (3⁄8” – ¾”) grades.
AMC BIO VIS XTRA™ is a premium grade, high viscosity, blend of natural polymers specifically formulated for mixing a low solids drilling fluid for use in a water well. AMC BIO VIS XTRA™ is a non-toxic free flowing powder that is biodegradable.
AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids. AMC BIOCIDE G™ is a more environmentally acceptable alternative to glutaraldehyde and does not cause skin sensitisation and dermatitis that can occur through the handling of glutaraldehyde making it safer to handle.