Showing 1–12 of 135 results
Conventional wireline coring has been transformed. High frequency energy pulse assisted drilling (EPAD) enables the IMDEX COREVIBE™ to deliver a 30%* productivity gain, due to increases of up to 90% rate of penetration (ROP) whilst retaining good bit life, core quality and hitting targets.
IMDEX XTRACTA™ allows the driller to inspect and/or change the bit/reamer each time the core is retrieved. This means there is no need to pull the rods to change bits and the hole is always cased, maintaining hole integrity.
AMC BEN™ is a high quality sodium bentonite for use in mineral exploration, water well and directional drilling.
AMC BENTONITE PELLETS R30™ are compressed tablets made from highly swelling sodium bentonite coated with a biodegradable non-sticking film that retards the hydration time and when placed forms a flexible, non-toxic impermeable seal. AMC BENTONITE PELLETS R30™ has the advantage of achieving greater depths due to the unique coating that slows down the hydration process.
AMC BENTONITE PELLETS™ are a highly compressed pellet made from premium sodium bentonite. AMC BENTONITE PELLETS™ has the advantage of achieving greater depths due to the highly compressive nature of the pellet.
AMC GRAVEL PACK 8/16™ is a screened river gravel with round to sub round structure creating an ideal filter pack for water production and monitoring bores. Use of a suitable filter pack can increase yield and pumping efficiency, reduce sand production, decrease development time and prolong bore life.
The AMC 1000 SC™ provides an innovative alternative to fluid sumps, offering solids control to optimise drilling fluid and drilling efficiency. The unit processes solids up to 260gpm / 1000Lpm, and incorporates high flow shakers suitable for HDD, mud rotary, diamond drilling and chip-core operations (up to 12 ¼” diameter for top hole drilling).
AMC 117™ provides superior shale and clay inhibition in polymer based drilling fluids. AMC 117™ reduces the potential for bit balling, torque and drag as well as other clay and shale related issues. All this is delivered by a product that is more environmentally acceptable than the inhibitor typically used, Potassium Chloride.
AMC 1300™ is a liquid non-ionic polymer specifically designed to perform in fresh water, saline environments and calcium chloride brines. AMC 1300™ will provide viscosity while also providing some lubrication to the drilling fluid resulting in improved hole stability and core recovery in broken, friable formations.
AMC 133X™ is a rapidly yielding, high molecular weight polymer in liquid form that provides viscosity without the problems associated with mixing powdered polymers. AMC 133X™ will help improve core recovery, particularly in clays and shales and highly fractured formations. It provides cuttings encapsulation as well as helping to stabilise the formation.
The AMC 1500 R™ RECYCLING UNIT is a German-engineered purpose built fluid recycling unit, designed to remove and dispose of drill cuttings in the mud flow cycle of horizontal directional drilling and waterwell drilling applications.
The AMC 2000 M™ is a self contained system enabling quick and efficient mixing of drilling fluids on site. The unit’s powerful high shear venturi mixing system allows for fast addition and provides a continuous workflow to improve efficiency in HDD, waterwell, microtunneling and deep drilling operations.