AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids.
AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
SODA ASH is a free flowing powder also known as sodium carbonate (Na2CO3) used in a fluid system to precipitate calcium (hardness) and increase alkalinity (pH).
AMC HV FOAM SW™ is a new generation, highly concentrated foam which have been formulated for use in mineral and water well drilling applications. AMC HV FOAM SW™ is specifically formulated to produce a stable, high density foam in all types of ground water conditions including brackish, highly saline and hard water.
MAGMA FIBER es un producto especialmente formulado de la extrusión de fibra mineral hilada. Las fibras largas y flexibles reducirán filtraciones y pérdida de circulación formando puentes y obstruyendo huecos, fracturas y todo tipo de formaciones permeables.
AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids.
AMC BIOCIDE G™ is a low toxicity, broad spectrum biocide designed to reduce and prevent bacterial and fungal activity in water based fluids.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC BORE HOLE STABILISER™ is a multifunctional product formulated specifically for air drilling applications including “Drill & Blast”. It helps prevent a wide range of down-hole problems including poor collaring, hole decay or sidewall instability, significantly reducing the need for excess conditioning, expensive redrills or casing.
AMC BENTONITE PLUG™ is designed for use as sealant for hole abandonment, casing seals or any vertical seal to prevent water movement up or down a borehole.
AMC BENTONITE PLUG™ is available in medium (M) (¼” – 3⁄8’’) and coarse (C) (3⁄8” – ¾”) grades.
AMC 117™ provides superior shale and clay inhibition in polymer based drilling fluids. AMC 117™ reduces the potential for bit balling, torque and drag as well as other clay and shale related issues. All this is delivered by a product that is more environmentally acceptable than the inhibitor typically used, Potassium Chloride.