AMC HAMMER OIL™ is a specially formulated mineral-oil based heavy duty hammer lubricant supplied in two ISO grades, 320 and 460 centipoises with or without molylube additive – molybdenum disulfide. This product improves the lubrication and wear characteristics of pneumatically powered DTH hammers.
AMC HAMMER OIL™ is a specially formulated mineral-oil based heavy duty hammer lubricant supplied in two ISO grades, 320 and 460 centipoises with or without molylube additive – molybdenum disulfide. This product improves the lubrication and wear characteristics of pneumatically powered DTH hammers.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC THREAD GREASE is a heavy duty thread compound containing specialised polymers and proprietary additives. It has a wide working temperature range, a low water wash value and aids in preventing corrosion. AMC THREAD GREASE is designed to reduce galling and friction and protects the threads from damage, wear and seizing.
AMC COPPER COMPOUND™ is a high quality, non-melt, anti-seize thread compound containing solid lubricants to ensure outstanding lubrication and high temperature resistance. AMC COPPER COMPOUND™ is designed to prevent galling, it protects threads from wear, tear and seizing. AMC COPPER COMPOUND™ will not evaporate when exposed to extreme high temperatures. AMC COPPER COMPOUND™ contains anti-rust agents, is wash resistant, will operate under extreme pressures and is lead free.
AMC BREAKOUT BLUE™ is an environmentally acceptable, high performance, anti-seize product. AMC BREAKOUT BLUE™ has outstanding film strength and resistance to corrosion, particularly in wet environments.
AMC HAMMER OIL™ is a specially formulated mineral-oil based heavy duty hammer lubricant supplied in two ISO grades, 320 and 460 centipoises with or without molylube additive – molybdenum disulfide. This product improves the lubrication and wear characteristics of pneumatically powered DTH hammers.
AMC HAMMER OIL™ is a specially formulated mineral-oil based heavy duty hammer lubricant supplied in two ISO grades, 320 and 460 centipoises with or without molylube additive – molybdenum disulfide. This product improves the lubrication and wear characteristics of pneumatically powered DTH hammers.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC HV FOAM SW™ is a new generation, highly concentrated foam which have been formulated for use in mineral and water well drilling applications. AMC HV FOAM SW™ is specifically formulated to produce a stable, high density foam in all types of ground water conditions including brackish, highly saline and hard water.
SODA ASH is a free flowing powder also known as sodium carbonate (Na2CO3) used in a fluid system to precipitate calcium (hardness) and increase alkalinity (pH).
AMC WATER CONDITIONER™ is a blend of water treating agents used for the treatment of water containing large amounts of magnesium, calcium and other metal ions that have a detrimental effect on the yield of drilling fluid additives such as bentonite or polymers.