The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry | Construcción civil, Geotécnica, Minería, Perforación horizontal dirigida, Pozo de agua |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
AMC VIS GEL™ is a blend of sodium bentonite and polymers, finely ground and processed to ensure ease of mixing, superior plastering qualities and high gel strengths when horizontal boring.
POTASSIUM CHLORIDE (KCl) is a soluble salt that is an extremely efficient shale stabiliser when drilling hydro sensitive clays and shales. Inhibition is provided through ion exchange; the potassium ion enters between the individual clay platelets in the shale so that they are held together, thus eliminating entry of water from the drilling fluid.
AUS DEX™ is a modified starch with a high degree of environmental acceptability. AUS DEX™ provides filtration control without excessive viscosity build-up in most water based fluids ranging from fresh water to high concentrations of monovalent salts and low concentrations of divalent ions.
The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
The density or weight of a given volume of liquid can be determined by using the AMC MUD BALANCE. The balance is constructed so that the fixed volume cup at one end of the beam is balanced by a fixed counterweight at the opposite end, with a sliding weight rider free to move along the graduated scale. A level bubble mounted on the beam indicates when the system is in balance.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
As part of IMDEX’s Drilling Optimisation solution, the IMDEX MUD AID™ and AMC Ultra-light Solids Removal Unit™ (ULW SRU™) converge to optimise rate of penetration, core recovery and meters per bit, utilising the latest solids control, fluid analysis and remote tracking technology – all in an ultra light-weight design.
The AMC 1000 SC™ provides an innovative alternative to fluid sumps, offering solids control to optimise drilling fluid and drilling efficiency. The unit processes solids up to 260gpm / 1000Lpm, and incorporates high flow shakers suitable for HDD, mud rotary, diamond drilling and chip-core operations (up to 12 ¼” diameter for top hole drilling).
AMC supplies replacement Pretensioned and Metal Back/Hook Strip screens which are compatible with AMC’s Solids Control range, as well as a wide variety of industry-recognized, and popular competitor models.