AMC FLOC DD™ is a specially formulated flocculant designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water based drilling fluid systems. The cationic charge found in AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.
AMC FLOC DD™ is a specially formulated flocculant designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water based drilling fluid systems. The cationic charge found in AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
The MARSH CUP is an instrument used to measure drilling fluid viscosity, commonly used with the AMC MARSH FUNNEL. The MARSH CUP is a measuring cup which is graduated in fluid ounces (2-32oz) and cubic centimeters (100 – 1,000cc) and is designed to be used with the MARSH FUNNEL.
SODA ASH is a free flowing powder also known as sodium carbonate (Na2CO3) used in a fluid system to precipitate calcium (hardness) and increase alkalinity (pH).
The SAND CONTENT KIT is a simple and accurate sieve analysis tool used to determine the sand content of drilling fluids.
