CALCIUM CHLORIDE is a salt used to create solids free brine workover and completion fluids. It can be used to prepare weighted drilling fluids where formation pressures require densities ranging from 1.02 – 1.40sg (8.5 – 11.7lb / bbl). In combination with CALCIUM BROMIDE, CALCIUM CHLORIDE achieves densities up to 1.8sg (15lb / bbl).
CALCIUM CHLORIDE is a salt used to create solids free brine workover and completion fluids. It can be used to prepare weighted drilling fluids where formation pressures require densities ranging from 1.02 – 1.40sg (8.5 – 11.7lb / bbl). In combination with CALCIUM BROMIDE, CALCIUM CHLORIDE achieves densities up to 1.8sg (15lb / bbl).
Note: This product may be subject to availability in your country. Several factors will dictate the most appropriate concentration rate. Please contact your nearest AMC representative for optimum results.
| Region | |
|---|---|
| Industry |
AMC’s team of fluid and equipment engineers resolves site-specific challenges and provides advice to reduce costs and improve productivity. For more information about our products, please contact your closest AMC representative.
Click the link below to find your closest AMC Office or a local distributor.
The MARSH FUNNEL is an instrument used to measure drilling fluid viscosity, commonly used with the AMC MEASURING CUP. The MARSH FUNNEL is molded from a tough, durable plastic that resists breaking or cracking. A brass orifice assures consistency in all readings.
The SAND CONTENT KIT is a simple and accurate sieve analysis tool used to determine the sand content of drilling fluids.
AMC VIS GEL SW™ is a proprietary blend of high quality bentonite and specially selected polymers that produce a complete drilling fluid system in areas where fresh water is not available. The AMC VIS GEL SW™ system is designed to improve carrying capacity and filtration control properties to promote borehole stability. AMC VIS GEL SW™ is unique in the fact it will blend and hydrate easily into hard to salt saturated water conditions and is ideal for all types of drilling applications.
